Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Some vehicles require extra strap length. Compatible with Saris' Bones bike racks, the Saris Extra Long S-Hook Straps 80" are made of strong nylon with coated hooks that protect your car's finish.
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Saris' Spare Tire Plate is for use with their spare tire racks. Grab the Spare as an extra or replacement part.
Add Saris' Freedom Long Wheelbase Bar to your Saris Freedom rack (sold separately) to carry an extra long wheelbase bicycle like a tandem or recumbent. The rack holds two bikes of up to 35 pounds each, and the Long Wheelbase Bar holds a bike that measures up to 57 inches axle to axle.
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
Nobody's getting close to your bike with Saris' Locking Cable and Hitch Tite Combo. The Hitch Tite secures your rack to the car and is compatible with all current Saris Hitch Racks (sold separately). For additional protection, the included 8-foot, 10mm cable locks your bike to the rack. Walk away from your car knowing that others will only be able to admire your wheels from afar.
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
Yakima's LoadStop brackets prevent your loads from shifting side to side, without having to stuff a whole bunch of folded-up blankets onto your roof. FEATURES: - Carries ladders and lumber with sturdy L-shaped brackets - Safely holds loads by preventing lateral shifts with grippy ribbed surface - Holds thicker, taller loads with a higher vertical edge - Compatible with Yakima crossbars only - Works well when paired with Heavy Duty Straps (sold separately) - Set of 4 brackets
$139.00 - $159.00
Yakima Tracks offer easy connectivity, and a low profile when the towers are removed. Combine the Tracks with Yakima Control Towers plus a set of their Landing Pads and you have a versatile, adjustable base for your rooftop car rack system (towers, pads and accessories sold separately). The Tracks come in pairs in 42- and 54-inch lengths with hardware for mounting on sheet metal, and 54- and 60-inch lengths with hardware for use with fiberglass.
Super simple, the EasyTop is an instant roof rack. Strap it on top of almost any vehicle to carry up to 80 lbs of long, flat gear – from skis and snowboards to boats and surfboards. It installs in minutes – just loop it through the door frames and buckle it up. The thick padding protects your vehicle and your gear, and the double-latching buckle adds extra security. Traveling out of town? Bring it along and strap it to your rental vehicle. - Straps on top of almost any vehicle to create an instant roof rack - Carries us to 80 lbs of gear - Great for boats, boards, skis, ladders, and other long, flat loads - Thick structural padding protects your roof and your gear - Secures easily through door frames with integrated straps - Double-latching buckle adds security - Includes two Heavy Duty Straps and tie-down rope
RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 20mm thru-axle, and you're all set.
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in the skewer, and you're all set.
Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.
If you have a full-suspension bike, a small bike or any bike without a traditional top tube, you need Evo's Top Tube Adapter to attach your bike to your rack. The vinyl-coated clamp protects your bike's finish, and is coated with a rust-free powder coat. It fits up to 44mm headsets and up to 38mm seat post diameters.
$18.95 - $44.95
Use the RockyMounts Lock Cores to secure your belongings, whether you're using the TieRod, PitchFork, TailPipe, LiftOp or any other RockyMounts rack. Each pack of Lock Cores comes with two keys and one, two, four, six, or eight lock cores.
- Rigid 6061-aluminum body with 9mm skewer
- Powdercoated steel body with 9mm skewer & hole in handle for padlock
This premium locking stand-up paddleboard (SUP) carrier delivers unmatched board security combined with a convenient, universal mounting design. - Exclusive, telescoping design delivers a custom fit for board widths up to 34" wide - Heavy-duty, steel reinforced webbing and spring loaded locking cam provide unsurpassed security for your boards - Soft, weather resistant padding protects boards during transit - 4 One-Key locks (included) 2 for locking strap assembly and 2 for Speedlink - Equipped with new Speed-Link mounting system for convenient, tool-free mounting to Thule rack systems, round bars and most factory racks - Two board capacity - Extra-long steel reinforced webbing and spring loaded locking cam provide unsurpassed security for your boards.
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.
Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).
Saris' Traps Wheel Holder mounts easily to your Saris Single or Triple Track (each sold separately) to keep your front wheel secured. It accepts the wheel with little or no quick-release adjustment. Mounting hardware is included.
This premium vertical carrier combines maximum strength and protection with greater versatility by folding down when not in use. - Folds down when not used for increased overhead clearance and improved fuel economy - Wide mouth J-profile offers easier loading and unloading - Steel design with adjustable padding for carrying strength and kayak protection - Quick on/off hardware ensures fast installation and removal
Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.
Premium load-assist carrier supports 50% of the kayak's weight with it’s sliding roller that extends beyond the back of the vehicle for easier loading and unloading and improved vehicle protection. - Sliding roller extends out beyond the back of the vehicle and supports up to 40lbs, 36” width and 50% of the kayak’s weight for easier loading and unloading - Pivoting saddles automatically conform to nearly every kayak shape and size for secure transportation - Double-coated, corrosion resistant steel designed for long-term use 4-touchpoints of padded support conform to the hull for added protection - Carries 1 kayak and requires 1 person to load and unload - Up to 2 carriers per vehicle - Includes all straps to transport 1 kayak - Requires Thule rack systems crossbars, round bars or factory racks (Sold separately) Technical specifications - Load capacity Water Crafts: 1 kayak - Fits Aero Profile: Yes - Fits SquareBar: Yes - Lockable: No - One Key System compatible: No - Factory rack mounting hardware included: Yes - Carrying type: Horizontal
Page 1 of 11 Next page